How to fit a BSC bottom bracket?

How to fit a BSC bottom bracket?

Here's how to assemble a BSC screw-in bottom bracket with external bearing, one of the most widespread standards in the MOUNTAIN BIKES.

  • Time : 30 min
  • Level : Medium
  • Tools : External bottom bracket wrench | Wire brush | Grease

Steps

  1. Brush the bottom bracket of your frame to remove any filings or burrs caused by machining.

  2. Grease the mountain bike frame and bottom bracket threads.

  3. Turn the right-hand part of the bottom bracket anticlockwise by hand. Finish tightening with the bottom bracket wrench.
    Probikeshop tip The thread is very fine, so use the housing wrench only when you are sure that the housing is properly engaged.

  4. Then screw the left-hand part of the housing clockwise by hand, and use the housing wrench for final tightening.

Now all you have to do is mount your crankset.

    Découvrez tous nos conseils & Tutoriels

    MTB - Bottom Brackets and Bearings

    • SRAM DUB BSA 73mm crankset

      SRAM DUB BSA 73mm crankset

      650,00 CZK
      650,00 CZK
    • SHIMANO XT SM-BB71-41A Press Fit 89.5/92mm crankset

      SHIMANO XT SM-BB71-41A Press Fit 89.5/92mm crankset

      338,00 CZK
      338,00 CZK
    • SRAM DUB PRESSFIT 89/92 mm crankset

      SRAM DUB PRESSFIT 89/92mm crankset

      936,00 CZK
      936,00 CZK
    • SHIMANO MT501 BSA crankset

      SHIMANO MT501 BSA crankset

      494,00 CZK
      494,00 CZK
    • SRAM DUB BSA 68/73 mm crankset

      SRAM DUB BSA 68/73 mm crankset

      780,00 CZK
      780,00 CZK
    • RACE FACE BSA/BSC crankset 30mm axle 68/73mm

      RACE FACE CINCH BSA/BSC 30mm 68/73mm axle crankset

      780,00 CZK
      780,00 CZK
    • RACE FACE CINCH X-TYPE TEAM PHIL WOOD BSA/BSC crankset 24mm 68/73mm axle

      RACE FACE X-TYPE TEAM XC BSA/BSC crankset Axle 24mm 68/73mm

      780,00 CZK
      780,00 CZK
    • SRAM GXP TEAM BSA 68/73 mm crankset

      SRAM GXP TEAM BSA 68/73 mm crankset

      780,00 CZK
      780,00 CZK
    View all